© Copyright 2004
Murphy Aircraft Mfg. Ltd.

Rebel Technical Support

The documents on this page are in PDF format and require the Acrobat Reader plug-in to view.  This plug-in is free and available from Adobe.

All new updates will include the entire chapter, not just the revised pages. This way, you can print out the chapter and replace the old one and be assured of having the most current manual without the risk of losing a step or two between revisions.

Manual Updates

Bulletins

NEW! (03/02/2006) Chapter 10.14 Wing Assembly - Step 17 NEW! (03/02/2006) Chapter 15.0 1650 Landing Gear (Fig.15.5.1.Bolt Size Change NEW! (03/02/2006) Chapter 20.0 Control Installation (Fig. 20.1.3 & Fig. 20.5.5) Ch. 14 Spring Gear Sep 22/04 Page 2, figure 14.1.2 Dimension to drill spring gear bolts has changed. Ch. 20 Controls Aug 17/04 Section 20.7, page 28 & 29. Para 8 and 12 have changed. Make the pushrods to measured dimension, not to dimensions previously given Ch. 22 Seat Assembly 01/07/02 Page 6 and fig 22.2.6. modified Ch. 12.05 Tail-wrap and Gussets01/07/02 Page 53,54,55 modified Spring Gear Attach Reinforcement 01/07/02 1650 Gear Drawing  06/01/00 Ch. 10.11 Wing   05/31/00 Ch. 10.12 Wing   06/02/00 Ch. 10.13 Wing   06/02/00 Ch. 10.14 Wing   06/02/00 Ch. 15 1650 Landing Gear   05/31/00 Skylight Installation  November 24, 1999 General Information: • Rebel FAQ's • Rebel O-320 Flight Manual  • Rebel O-235 Flight Manual • Rebel Maintenance Manual • Rotax Owners Association • Rotax Aircraft Engines Information

DUE TO THE RECENT FAILURE OF A TRIM HORN ON A REBEL WHERE THE HORN WAS NOT DOUBLED AS INSTRUCTED IN THE MANUAL AND AS PER BULLETIN 110520 REB, PLEASE REFER TO THIS BULLETIN AND INSPECT YOUR AIRCRAFT BEFORE FURTHER FLIGHT 13" Spinner Instructions Rebel Vertical Tail Post Spar Attach, May 2000 Tailwheel Assembly, October 1999 Rebel Spring Gear, November 1998 Float Fix SG Bolt Test Results, November 1997 Inboard Spring Gear Bolt (AN6-45A) Flap/Aileron Retro kits, October 1997 Welded Tank Installation, April 1996 Center Of Gravity Calculations, April 1996 Drilling of Landing Gear Legs, June 1995 Rebel Fuel System Modifications, July 1995 Float 5% rule, October 1995 Trim Horn April 1995 -  download Acrobat

 

Technical "Thoughts You Might Like to Know..."
Standard Aircraft Assembly Procedures		Tech Tips from the Tech Department
Frequently Asked Questions (FAQ's)		Rotax Owners Association
	Landing Light Kits  New Wingtip Landing Lights		Wiring diagram for alternators supplied by MAM